20kW Diesel Space Heater 5 Models at 20 kW
A 20 kW diesel space heater is 68,243 BTU/h, and we build 5 models at exactly that step — 4 direct fired and 1 indirect fired. Because the output is identical, the decision is not how much heat but what is in the air.
The five split by job. Small construction sites, workshops and garages take one direct fired unit; retail units, showrooms and drying rooms take another; agricultural buildings, poultry and livestock sheds and barns take a third; event marquees, temporary site accommodation and outdoor working areas take the fourth. The 1 indirect model in the group is the one for occupied workshops and paint and finishing areas, where the flue has to be ducted away.
All 5 share the category build: 441-grade stainless steel combustion chamber rated to 1000°C, overheat cut-off, heat-dissipation protection, flameout protection, shutdown protection and an error indicator light, with the electrical load limited to the fan motor, ignition and fuel pump. Every model on this page is built for diesel or kerosene only — no model here is approved for petrol or bio-oil.

The 20 kW Step at a Glance
20 kW is 68,243 BTU/h. All 5 models on this page sit at that single step, so the choice is firing type and application, not output. BTU/h is converted from the published kW rating at 1 kW = 3,412.14 BTU/h.
All 5 Models at 20 kW / 68,243 BTU/h
Click a model to open its full specification sheet, feature list and recommended applications.
FS20-23A20kW Diesel Forced Air Heater with Thermostat FS20-23A20 kW · 68,243 BTU/h · Direct fired
FS20-21A20kW Direct Fired Diesel Heater for Drying and Plaster Work FS20-21A20 kW · 68,243 BTU/h · Direct fired
FS20-19A20kW Diesel Space Heater for Agricultural Buildings FS20-19A20 kW · 68,243 BTU/h · Direct fired
FS20-21B20kW Diesel Heater for Marquees and Temporary Structures FS20-21B20 kW · 68,243 BTU/h · Direct fired
FS20-23BI20kW Indirect Diesel Heater with Clean Dry Heat FS20-23BI20 kW · 68,243 BTU/h · Indirect fired20 kW Diesel Space Heaters — Full Specification
Heat output as published on each model’s own specification sheet. The BTU/h column is the kilowatt figure converted at 1 kW = 3,412.14 BTU/h — it is a conversion, not a second rating.
| Model | Heat output | Equivalent | Firing | Recommended use |
|---|---|---|---|---|
| FS20-23A | 20 kW | 68,243 BTU/h | Direct fired | Small construction sites, workshops, garages |
| FS20-21A | 20 kW | 68,243 BTU/h | Direct fired | Retail units, showrooms, drying rooms |
| FS20-19A | 20 kW | 68,243 BTU/h | Direct fired | Agricultural buildings, poultry and livestock sheds, barns |
| FS20-21B | 20 kW | 68,243 BTU/h | Direct fired | Event marquees, temporary site accommodation, outdoor working areas |
| FS20-23BI | 20 kW | 68,243 BTU/h | Indirect fired | Occupied workshops, paint and finishing areas |
Output Steps on This Page
All 5 models on this page sit at the same output step, so the choice is firing type and application rather than output.
Where a 20 kW Diesel Space Heater Is Used
68,243 BTU/h is small-site and interior output, not hall output.
Construction sites, workshops and garages
One direct fired model names construction sites, workshops and garages — the FS20-23A, which also carries thermostat control.
Retail units, showrooms and drying rooms
One model is specified for retail units, showrooms and drying rooms: enclosed interiors where the unit runs during trading hours.
Marquees, agricultural buildings and livestock sheds
One direct fired model covers event marquees, temporary site accommodation and outdoor working areas; another covers agricultural buildings, poultry and livestock sheds and barns.
Other Diesel and Kerosene Heater Specifications
Each specification below opens the models in production for it, with heat output, firing type and recommended application.
20 kW Diesel Space Heaters — Common Questions
How many 20 kW models do you make?
5: 4 direct fired and 1 indirect fired, all at 68,243 BTU/h.
Is 20 kW enough for a workshop?
It is the second step up in the range, above 10 kW and below 30 kW. Volume, insulation and air movement decide it — send the dimensions and we will size it against the full diesel and kerosene range.
Which 20 kW model has a thermostat?
One: the FS20-23A. See the kerosene heater with thermostat page.
Direct or indirect at 20 kW?
4 are direct fired and 1 is indirect fired. Pick the indirect one if people occupy the space all day or if there is dust, coating or food in the air — see the indirect fired diesel heater page.
What is 20 kW in BTU/h?
68,243 BTU/h at 1 kW = 3,412.14 BTU/h.
Is there a larger step?
Yes. The next step is 30 kW — see the 30 kW diesel space heater page. The range runs from 10 kW to 190 kW.
Need 20 kW Diesel Space Heater Pricing?
Send the model, the specification you want, your market and the target quantity — we reply within 24 hours with FOB pricing, lead time and a loading plan.
Send Inquiry