Cabinet Gas Heater 4 Models
A cabinet gas heater is a free-standing room heater built into a tall enclosed body — the burner sits inside the cabinet and the front radiates into the room from a large face.
All %d models on this page share one body: 420 × 360 × 730 mm. That shared platform is deliberate — you get four different front and control designs in the same performance class, so a distributor range can be built from one container without four sets of spare parts.
Three of the four are adjustable units running 1.5 kW to 4.2 kW, so the same heater covers a mild afternoon at 1.5 kW and a cold morning at 4.2 kW without being switched off. The fourth, the FSHE 05, is a dual-fuel build: 4.2 kW of gas output plus a 1200 W electric element at 220 V 50 Hz, so the user picks gas for cheap high output or electricity for a quick start.
Cabinet Gas Heaters at a Glance
Every figure is taken from the specification table of the model it describes.
All 4 Cabinet Gas Heaters
Click any model to open its full specification sheet, carton dimensions and loading quantity.
FS-H002CGas Room Heater with 1400W Fan for Fast Heat Distribution FS-H002CCabinet · 1.5–4.2 kW · 420 × 360 × 730 mm
FS-002F1.5 to 4.2kW Gas Room Heater with Adjustable Output FS-002FCabinet · 1.5–4.2 kW · 420 × 360 × 730 mm
FS-8014.2kW Gas Room Heater for Living Areas and Bedrooms FS-801Cabinet · 1.5–4.2 kW · 420 × 360 × 730 mm
FSHE 054.2kW Dual Fuel Gas Room Heater with 1200W Electric Backup FSHE 05Cabinet · 4.2 kW · 420 × 360 × 730 mmCabinet Gas Heaters — Size, Weight and Loading Data
All four share the same 420 × 360 × 730 mm body, but the carton and the loading quantity differ — check the carton column before you plan a container.
| Model | Gas output | Fan / electric | Product size (mm) | Carton (mm) | QTY / 40HQ |
|---|---|---|---|---|---|
| FS-H002C | 1.5–4.2 kW | Fan 1400 W | 420 × 360 × 730 | 455 × 382 × 765 | 540 pcs |
| FS-002F | 1.5–4.2 kW | — | 420 × 360 × 730 | 430 × 150 × 710 | 1,500 pcs |
| FS-801 | 1.5–4.2 kW | — | 420 × 360 × 730 | 430 × 150 × 710 | 1,500 pcs |
| FSHE 05 | 4.2 kW | Electric 1200 W | 420 × 360 × 730 | 455 × 382 × 765 | 540 pcs |
Same Body, Two Carton Strategies
The two cartons in this group are not interchangeable, and the difference shows up directly in how many units fit in one 40HQ.
455 × 382 × 765 mm
FS-H002C and FSHE 05. The carton adds roughly 35 mm around the body on every face, so the unit ships assembled and protected. Loading: 225 pcs per 20GP and 540 pcs per 40HQ.
430 × 150 × 710 mm
FS-002F and FS-801. A flat 150 mm carton against a 360 mm deep body, so the same heater packs at 650 pcs per 20GP and 1,500 pcs per 40HQ — close to three times the density of the assembled carton.
Adjustable Output vs Single-Rate Output
Three of the four cabinet models let the user choose the output; the fourth is fixed at its rated gas power and adds an electric element instead.
Other Gas Heater Specifications
Each specification below opens the models in production for it, with product size, carton size, net and gross weight and 40HQ loading quantity.
Cabinet Gas Heaters — Common Questions
What is a cabinet gas heater?
A free-standing gas room heater built into a tall enclosed cabinet of about 420 × 360 × 730 mm, with the burner and controls inside the body and the heat radiating from the cabinet front. It stands on the floor and needs no flue.
How much output do the cabinet models give?
Three models — FS-H002C, FS-002F and FS-801 — are adjustable from 1.5 kW to 4.2 kW. The FSHE 05 is rated at 4.2 kW gas with a 1200 W electric element as a second heat source.
What is a dual-fuel gas heater?
The FSHE 05 carries both a 4.2 kW gas burner and a 1200 W electric element at 220 V 50 Hz in the same cabinet. The user chooses the source that suits the moment — gas for cheap high output, electricity for instant heat.
Why does the container loading differ so much between models?
Because the carton does. The assembled carton is 455 × 382 × 765 mm and loads 540 pcs per 40HQ; the flat 430 × 150 × 710 mm carton loads 1,500 pcs per 40HQ from the same body.
Do cabinet gas heaters need a flue?
The models on this page are vent-free and require no flue or wall opening. They rely on a flame-failure device and an oxygen depletion sensor, and must be installed with the ventilation your local code requires for unvented gas appliances.
Are other colours and voltages available?
Yes. Custom colour, printed logo, packaging artwork and plug standard are standard order options on the range. Voltage and plug are engineered to the destination market, and the gas side is set up for the fuel that market uses.
Need Cabinet Gas Heater Pricing?
Send the model, the carton configuration you want, your fuel and market, and the target quantity — we reply within 24 hours with FOB pricing, lead time and a loading plan.
Send Inquiry