Diesel & Kerosene Heaters
60kW Diesel Heater with Thermostat for Event Halls
Model: FS60-23B
The FS60-23B is a 60kW direct-fired diesel and kerosene heater from our 10kW to 190kW forced-air range. It burns diesel or kerosene in a 441-grade stainless steel combustion chamber rated to 1000°C and blows the heated air straight into the working area through a high-power enclosed fan, so heat arrives within seconds of ignition. Direct-fired units raise the incoming air temperature by 40–60°C and are intended for well-ventilated sites with an air change rate high enough to carry the combustion products away — construction and renovation work, workshops, warehouses, barns, factories, dock yards and rail or road works. Other 60kW direct-fired models sharing this output: FS60-19A, FS60-19B. Tell us the destination market and we will confirm the voltage, plug and certification package that goes with this model.
Features
- 60kW for exhibition and event halls that need heat on demand
- Thermostat control keeps fuel use proportional to the outdoor temperature
- 441-grade stainless steel combustion chamber, rated to 1000°C
- Multi safety protection: overheat cut-off, heat-dissipation protection, flameout protection, shutdown protection and error indicator light
- Fuel: diesel or kerosene only — petrol and bio-oil must not be used
60kW Diesel Heater with Thermostat for Event Halls
The FS60-23B is a 60 kW direct-fired diesel heater for exhibition halls, event spaces and temporary venue structures that need heat on demand — brought in, run for the duration and removed afterwards, with no installed system to carry the cost between events.
Thermostat control is what makes temporary heating affordable: fuel use stays proportional to the outdoor temperature instead of the unit running at 60 kW regardless, so a mild week costs a fraction of a cold one. In a hired venue that difference decides whether the heating line on the job sheet works. The 441-grade stainless steel combustion chamber is rated to 1000 degrees C, and five protections are fitted — overheat cut-off, heat-dissipation protection, flameout protection, shutdown protection and an error indicator light. Fuel must be diesel or kerosene only, and the space must be well ventilated.
FirstSight supplies this 60 kW diesel heater as a wholesale and OEM line — your voltage and plug standard, logo, paint colour and carton artwork. Event hire, exhibition and trade buyers are the main users. Ask for the diesel heater catalogue, certificates and test reports.
| Model | FS60-23B |
|---|---|
| Product Name | Diesel Kerosene Forced Air Heater |
| Heating Output | 60kW |
| Fuel Type | Diesel / Kerosene — diesel or kerosene only, never petrol or bio-oil |
| Heating Type | Direct fired — open flame heats the air stream, delivered by fan |
| Combustion Chamber | 441-grade stainless steel, rated to 1000°C |
| Electrical Load | Fan motor, ignition and fuel pump only — approx. 0.4–0.5 kWh per hour at 50kW output |
| Recommended Use | Exhibition halls, event venues, temporary large structures |
| Technical Data Sheet | Full specification, manual and spare-parts list available on request |
More Diesel & Kerosene Heaters from FirstSight
80kW Diesel Forced Air Heater FS80-20C
100kW Diesel Forced Air Heater FS100-20C
115kW Diesel Forced Air Heater FS115-20C
150kW Diesel Forced Air Heater FS150-20C
190kW Diesel Forced Air Heater FS190-20C
20kW Indirect Diesel Heater FS20-23BIBrowse all Diesel & Kerosene Heaters (28 models)|Outdoor Patio Heaters (12 models)|See the full range
Need a Quote for This Model?
Send us your target quantity and destination port — we reply within 24 hours with pricing and lead time.