Diesel & Kerosene Heaters
80kW Indirect Diesel Heater for Warehouses and Storage
Model: FS80-20CI
The FS80-20CI is a 80kW indirect-fired diesel and kerosene space heater. Unlike a direct-fired unit, the flame heats a stainless steel heat exchanger and the flue gases are ducted away separately, so the air delivered into the room is clean, dry and free of combustion products. That makes the FS80-20CI suitable for occupied workshops, food and packaging areas, painting and coating lines, greenhouses and livestock buildings, and any space where humidity or air quality is controlled. Tell us the destination market and we will confirm the voltage, plug and certification package that goes with this model.
Features
- Indirect fired — the largest of our indirect models at 80kW
- Dry, fume-free heat for warehouses and humidity-critical storage
- 441-grade stainless steel combustion chamber, rated to 1000°C
- Multi safety protection: overheat cut-off, heat-dissipation protection, flameout protection, shutdown protection and error indicator light
- Fuel: diesel or kerosene only — petrol and bio-oil must not be used
80kW Indirect Diesel Heater for Warehouses and Storage
The FS80-20CI is an 80 kW indirect-fired diesel heater, the largest of the indirect models, delivering dry, fume-free heat for warehouses and humidity-critical storage — bonded stores, paper and board storage, packaging stock, textile warehouses and food distribution depots.
Dry and fume-free is the specification that matters in humidity-critical storage: a direct-fired unit adds water vapour to the air as it burns, which is the last thing a paper, board or food store needs, and it also adds combustion products that can taint stored goods. Indirect firing through a heat exchanger removes both problems while still delivering 80 kW. The 441-grade stainless steel combustion chamber is rated to 1000 degrees C, and the standard protection set — overheat cut-off, heat-dissipation protection, flameout protection, shutdown protection and an error indicator light — is fitted. Fuel must be diesel or kerosene only.
FirstSight supplies indirect diesel heaters up to 80 kW as a wholesale and OEM line — your voltage and plug standard, logo, paint colour and packaging. Ask for the diesel heater catalogue, certificates and test reports.
| Model | FS80-20CI |
|---|---|
| Product Name | Indirect Kerosene Diesel Space Heater |
| Heating Output | 80kW |
| Fuel Type | Diesel / Kerosene — diesel or kerosene only, never petrol or bio-oil |
| Heating Type | Indirect fired — combustion gases are separated from the heated air stream |
| Combustion Chamber | 441-grade stainless steel, rated to 1000°C |
| Electrical Load | Fan motor, ignition and fuel pump only — approx. 0.4–0.5 kWh per hour at 50kW output |
| Recommended Use | Large warehouses with humidity control, industrial drying |
| Exhaust | Combustion gases must be ducted or flued away from the heated area |
| Technical Data Sheet | Full specification, manual and spare-parts list available on request |
More Diesel & Kerosene Heaters from FirstSight
10kW Diesel Forced Air Heater FS10-21A
10kW Diesel Forced Air Heater FS10-23A
20kW Diesel Forced Air Heater FS20-23A
20kW Diesel Forced Air Heater FS20-21A
20kW Diesel Forced Air Heater FS20-19A
20kW Diesel Forced Air Heater FS20-21BBrowse all Diesel & Kerosene Heaters (28 models)|Outdoor Patio Heaters (12 models)|See the full range
Need a Quote for This Model?
Send us your target quantity and destination port — we reply within 24 hours with pricing and lead time.