Cixi Ningbo | +86 15857443259 | sales@nbchic.com
English ▾ | Inquiry | Login
Instant Quote

Contact Us

WeChat / 微信

+86 15857443259

Add us on WeChat by this number, or email us and we will send our QR code.

Email Us

sales@nbchic.com

Tap to copy, or write to us any time — we reply within 24 hours.

Open Email App
1400 W Fan · 1.5–4.2 kW Gas · 420 × 360 × 730 mm

Gas Heater with Electric Fan FS-H002C

A gas heater with an electric fan uses the burner for heat and the fan to move that heat — instead of relying on radiation and natural convection, the warm air is pushed out into the room.

The FS-H002C is the model in our range built this way. It combines an adjustable 1.5 kW to 4.2 kW gas burner with a 1400 W fan in the same 420 × 360 × 730 mm cabinet. The gas provides the heat and the fan moves it: rather than relying on radiation and natural convection, the fan pushes the warm air out and around the room.

Fan assistance is what makes a gas room heater usable in a room with high ceilings or an awkward shape, where radiant heat and convection alone would leave one end cold, and it speeds recovery after a door has been opened. The gas side remains a vent-free burner with the same safety package as the rest of the range: a flame-failure device that shuts the gas off within 30 seconds if the flame goes out, and an oxygen depletion sensor that shuts the heater down when room oxygen falls.

Request a Quote See the Model

Gas Room Heater with 1400W Fan for Fast Heat Distribution FS-H002C
Key Figures

FS-H002C at a Glance

Figures from the model’s own specification table.

1400 Wfan power
1.5–4.2 kWadjustable gas output
420 × 360 × 730 mmshared FS cabinet body
540 pcsper 40HQ container
Model

The Fan-Assisted Gas Heater

One model in the range is built with a fan. Click through for its full specification sheet.

Specification Table

FS-H002C — Size, Weight and Loading Data

Product size is the assembled unit in millimetres. Loading quantity is based on a standard 40HQ container.

FS-H002C gas heater with electric fan — specification
ModelGas outputFan / electricProduct size (mm)Carton (mm)QTY / 40HQ
FS-H002C1.5–4.2 kWFan 1400 W420 × 360 × 730455 × 382 × 765540 pcs
How It Works

What the Fan Changes

A radiant gas heater warms people and objects in its line of sight. Adding a fan changes where that heat ends up.

High ceilings

Without air movement, warm air stratifies near the ceiling and the occupied zone stays cold. The fan mixes the room instead of letting the heat rise and stay up.

Awkward room shapes

An L-shaped or partitioned room has no single line of sight to a radiant face. Fan-forced air reaches around the corner; radiant heat does not.

Recovery after a door opens

A fan distributes heat back through the room faster than convection alone, so the temperature comes back up sooner after a door or window is opened.

Not a Fan Model

The Dual-Fuel FSHE 05 Has an Electric Element, Not a Fan

A 1200 W electric element and a 1400 W fan are two different things, and buyers often ask for one when they mean the other.

FS-H002C — fan

1400 W fan moves air. The heat itself still comes entirely from the gas burner. It is the model on this page.

FSHE 05 — electric element

1200 W electric heating element at 220 V 50 Hz as a second, independent heat source alongside 4.2 kW of gas. It is a dual-fuel heater, not a fan-assisted one — see the cabinet gas heaters.

FAQ

Gas Heater with Electric Fan — Common Questions

What is a gas heater with electric fan?

A gas room heater whose burner provides the heat and whose electric fan moves that heat into the room, instead of relying on radiation and natural convection alone. In our range this is the FS-H002C.

How much fan power does it have?

1400 W, paired with an adjustable 1.5 kW to 4.2 kW gas burner in a 420 × 360 × 730 mm cabinet.

Does the fan make the heater more expensive to run?

The fan is the only part that uses electricity; the heat still comes from gas. For buyers comparing running cost, gas consumption is set by the burner, not by the fan setting.

Is the FSHE 05 the same as this heater?

No. The FSHE 05 has a 1200 W electric heating element as a second heat source — a dual-fuel heater. The FS-H002C has a 1400 W fan that moves the gas heat. If you need both gas and electric heating in one unit, order the FSHE 05.

Does it need a flue or a mains connection?

No flue is needed — it is a vent-free gas heater with a flame-failure device and an oxygen depletion sensor. The fan does need a mains supply, so the gas can be used with the fan off but not the other way round.

How many units fit in a 40HQ container?

225 pcs per 20GP and 540 pcs per 40HQ, in a 455 × 382 × 765 mm carton.

Need Fan-Assisted Gas Heater Pricing?

Send the model, the fan and gas configuration you need, and your target quantity — we reply within 24 hours with FOB pricing, lead time and loading figures.

Send Inquiry